Central Texas time
It is late. Here is what to do.
We respond 24 hours a day. Send your request and a team member will call you back within 90 minutes.
If anyone is in danger, or there is fire, smoke, or a gas smell, leave and call 911 first.
- 1
Shut off the water.
Close the main valve, usually near the street, in the garage, or where the line enters the house. If the leak is from one fixture, close its valve.
- 2
Make the wet rooms safe.
Turn off power to wet rooms at the breaker, but only if you can reach it without standing in water. Move people and pets out of those rooms.
- 3
Record it, then send the form.
Take a slow video of every wet room before you move anything. Then send the short form on this page and a team member will call you back within 90 minutes.
- 1
Stay out until it is cleared.
Do not go back in until the fire department says it is safe. If you smell smoke and do not know where it is coming from, call 911.
- 2
Leave the soot alone.
Keep the heating and cooling system off. Do not wipe walls or run fans. Wiping pushes soot deeper into paint and fabric.
- 3
Record it, then send the form.
From a safe spot, take photos and video. Then send the short form on this page and a team member will call you back within 90 minutes. We can arrange board-up and tarping to secure the property.
Secondary service
Rebuild after mitigation
Once the home is dry, clean, and documented, the finished spaces can be put back. We coordinate that work with the same file, so nothing is lost between the mitigation and the rebuild.

What rebuild after mitigation means
Rebuild after mitigation is the work that returns a home to its finished condition after water or fire damage has been stopped, dried, and cleaned: replacing drywall, trim, flooring, cabinetry, and finishes that had to be removed.
The mitigation file is the starting point. It shows exactly which materials were removed and where, which keeps the rebuild scope grounded in what actually happened.
The goal is the finish level the home had before the loss. In homes with custom millwork, natural stone, or site-finished floors, that means matching what was there, not settling for the nearest standard product.
How we approach the rebuild
- Scope based on the mitigation file and your walkthrough
- Matching original materials and finish levels where possible
- One point of contact from mitigation through rebuild
- Your choice of builder is always respected
FAQ
Rebuild questions
When does the rebuild start?
The rebuild starts after mitigation is complete: the structure is dry, residue is cleaned, and the closeout readings and photos are on file. Starting earlier risks closing up materials that are still wet.
Can I use my own builder for the rebuild?
Yes. You choose who rebuilds your home. If you have a builder you trust, we hand over the mitigation file so they can see what was removed and why.
Open a file
Water or fire damage? Talk to a team member.
We respond 24 hours a day. Send the short form and a team member will call you back within 90 minutes. We come out, look at the damage, and give you an honest assessment. There is no pressure to sign anything on the first visit.
What goes in your file
- 01An honest assessment. A team member looks at the damage in person and tells you plainly what we see and what we recommend.
- 02A written scope before work starts. You know what we plan to do and why, and you can share it with your insurance company.
- 03Photo and video documentation. Every affected area is recorded before, during, and after the work.
- 04Moisture readings and drying records. Logged on each visit until materials reach their drying goals.
- 05A room-by-room contents inventory. When contents are packed out, each item is listed, photographed, and tracked.
- 06A closeout file. Photos, readings, inventory, scope, and the signed completion record in one place.
Intake sheetForm 111-A
Request a call back
Tell us where and what happened. Required fields are marked.

