Responding 24 hours a day

Sample file

What your file looks like

Four sample documents from a fictional water job, laid out the way we prepare them on real jobs. Every name, address, and reading here is made up and marked SAMPLE.

Section 01
Contents of the file

Four documents, one job

A scope you approve before work starts, a reading log that shows drying point by point, a drying plan that shows where the equipment goes, and contents lines kept stage by stage.

  1. AScope approval
  2. BReading log
  3. CDrying plan
  4. DContents lines

Document A Signed before any work starts

111 RESTORATIONFire · Water · Contents
Job No.SAMPLE-0001

Mitigation scope approval

This page explains, in plain terms, the work we will do to dry the home and protect your belongings.

Customer
Sample Homeowner
Property
Sample address, Central Texas
Loss type
Water, clean source
Date of loss
Sample date

What we found

At our first visit, water from a supply line had spread into three rooms. Wet readings were taken at marked wall and floor points. One unaffected room was dry and is our dry reference. These are observations, not a finding on what caused the leak or on insurance coverage.

Mitigation scope

  • Contain. Set up plastic containment and zip doors to create the drying areas shown on the drying plan.
  • Remove wet materials. Extract standing water and remove wet materials that cannot be dried or restored, as marked on the moisture map.
  • Clean. Clean exposed surfaces before drying equipment is set.
  • Dry and monitor. Run dehumidifiers and air movers and check readings until every point reaches its dry goal.

Not included in this scope

Repairs and rebuilding are handled separately. If we find hidden damage or other conditions, we will show you and send a written change order before doing that work.

Your approval

  • You reviewed this scope and the attached drying plan and approve the work described above.
  • This approval is not a decision by your insurance company on coverage or payment.
  • Any change to this scope will be put in writing on a change order before the work is done.
Customer signature
111 Restoration
Date

111 Restoration | Scope approval | Sample document, fictional data

Document B Filled in on every visit

111 RESTORATIONFire · Water · Contents
Job No.SAMPLE-0001

Moisture reading log

Same points, same meter, same setting, every visit. A point is dry only at or below its dry goal.

Customer
Sample Homeowner
Property
Sample address, Central Texas
Meter
Same meter and setting each visit
Reference
Room 4, dry and unaffected

Scroll sideways to see the full table

Sample moisture readings by point and visit, with the dry goal for each point
PointRoomMaterialDry goalVisit 1Visit 2Visit 3Visit 4Status
W1Room 1Drywall1238241511Dry
W2Room 1Drywall1241291812Dry
W3Room 2Drywall1235221410Dry
W4Room 2Drywall1244312727No drop: stop and call
W5Room 3Drywall1230191312Dry
F1Room 1Slab2046372821Drying
F2Room 2Slab2049403124Drying
F3Room 3Slab2039292219Dry

Reading this log. Dry goals are set from readings on the same materials in the reference room. Shaded values are at or below the goal. Point W4 showed no drop between visits 3 and 4, so it was noted and called in for review before any change. Equipment stays in Room 1 and Room 2 until every point there is dry. Each reading is photographed with the meter and the spot in the same frame.

111 Restoration | Reading log | Sample document, fictional data

Document C Attached to the scope approval

111 RESTORATIONFire · Water · Contents
Job No.SAMPLE-0001

Drying plan sketch

Drying chambers, containment, and where each piece of equipment goes. Attached to the scope approval.

Customer
Sample Homeowner
Property
Sample address, Central Texas
Chambers
Three wet chambers, one dry reference
Equipment
Placed and logged by chamber
Sample drying plan sketchA simple floor plan with three drying chambers separated by poly walls and zip doors, a dehumidifier and air movers in each wet chamber, an air scrubber, the water source, and a dry reference room. CH 1 / Room 1 CH 2 / Room 2 CH 3 / Room 3 Room 4Dry referenceNo equipment DH AS DH DH S SAMPLE
  • DHDehumidifier, one in each wet chamber
  • ASAir scrubber
  • Air mover, aimed along the wet wall
  • Zip door or poly wall between chambers
  • SWater source
  • Dry reference room, not cut

Reading this sketch. Each chamber is closed off so its dehumidifier works on that space alone. The reference room stays outside the work and is read on every visit as the dry comparison. Equipment in a chamber comes out only when every point in it is dry.

111 Restoration | Drying plan | Sample document, fictional data

Document D When contents are handled

111 RESTORATIONFire · Water · Contents
Job No.SAMPLE-0001

Contents line items

Each contents stage is its own line, so each can be reviewed on its own. No prices are shown on this sample.

Customer
Sample Homeowner
Property
Sample address, Central Texas
Rooms
Room 1, Room 2, Room 3
Inventory
Attached, by room

Scroll sideways to see the full table

Sample contents line items, one line per stage
LineStageDescriptionUnitRecord kept
01Pack-outVideo of each room, items listed, photographed, wrapped, boxed, and labeled by room, then loaded.Per box or itemInventory with photos and box labels
02StorageKept in a climate-controlled storage facility, organized by room.Per storage periodLocation by box, dates in and out
03CleaningCleaned with a method chosen for the material.Per item or item groupMethod and result by item group
04DeodorizationOdor treated after cleaning, once the residue is removed.Per item or item groupItems treated, method, result
05Furniture handlingPadded and moved, or blocked up and protected in place.Per pieceCondition photos at pick-up and return
06Pack-backReturned to the room it came from and checked against the inventory with you.Per box or itemSigned pack-back confirmation

111 Restoration | Contents line items | Sample document, fictional data

See how a water job runs   For adjusters and agents

FAQ

Questions about the sample file

Is this real customer information?

No. Every name, address, job number, and reading on this page is fictional and marked SAMPLE. The layout is the same one we use on real jobs.

Who receives the file on a real job?

The property owner receives the full file. With the owner's permission, we share it with the assigned adjuster, the property manager, or the owner's builder.

Do the documents include prices?

Not on this page. The scope approval explains the work in plain language. Pricing follows the signed authorization for each job.

Open a file

Water or fire damage? Talk to a team member.

We respond 24 hours a day. Send the short form and a team member will call you back within 90 minutes. We come out, look at the damage, and give you an honest assessment. There is no pressure to sign anything on the first visit.

What goes in your file

  • 01An honest assessment. A team member looks at the damage in person and tells you plainly what we see and what we recommend.
  • 02A written scope before work starts. You know what we plan to do and why, and you can share it with your insurance company.
  • 03Photo and video documentation. Every affected area is recorded before, during, and after the work.
  • 04Moisture readings and drying records. Logged on each visit until materials reach their drying goals.
  • 05A room-by-room contents inventory. When contents are packed out, each item is listed, photographed, and tracked.
  • 06A closeout file. Photos, readings, inventory, scope, and the signed completion record in one place.

See our process

Intake sheetForm 111-A

Request a call back

Tell us where and what happened. Required fields are marked.

Send the form and a team member will call you back within 90 minutes. We use your details only to respond to this request. See our privacy notice.

Request a call back